When the kitchen printer stops, everything stops with it. The good news is that it’s usually a simple fix. Here’s what to check first.
When it’s busy and the tickets stop printing, it’s easy to panic and forget the basics. That happens to everyone. These are the printer problems we walk customers through most often.
First, keep the kitchen moving. Have someone read orders out loud or jot them down on a pad while you troubleshoot. The kitchen stays calm, and you can focus on the fix.
Then work through these checks, starting with the most common.
1. Check the paper.
This is our number one kitchen printer call, and it’s the easiest fix. Paper always runs out at the worst time, usually right in the middle of the rush. There’s a PAPER OUT light on the printer that comes on when the roll is out or nearly out. If that light is on, grab a new roll. Keep a spare roll right next to the printer, not in the back closet, and definitely not “somewhere in the office.”
If the ERROR light is still blinking after replacing the paper, check the paper cover. An open cover causes it, and it clears by itself once the cover is closed. Make sure it’s shut firmly.
2. Check the power cord and the adapter block.
This is our number two call. Every printer has a power cord that runs into a little box called an adapter block. That cord can come loose, or just slightly out of the block, and everything looks fine until it isn’t. The POWER light is on when the printer is on. If there are no lights at all, check the power cable connections and the outlet. Push everything in firmly, at the block and at the wall. Mops, carts, and busy feet are very good at nudging cords loose.
Also check the on/off switch. It’s on the front of the printer. It’s easy to bump.
3. Check the network cable.
Your printer gets its orders over a network cable, so make sure it’s plugged in at both ends. If you see small lights next to the plug, they should be on or blinking.
4. Restart the printer.
If nothing else worked, turn the printer off, unplug it for about 10 seconds, then plug it back in and turn it on. Power cycling the printer is a standard first step for an error light. It’s the oldest trick there is, and it works more often than you’d expect.
5. Look for a paper jam.
Turn the printer off and gently remove the jammed paper.
6. Tickets printing, but faint or empty?
Your printer uses an ink ribbon, and ribbons wear out over time. If tickets are hard to read, the ribbon is the first thing to check. Not sure how to swap it? Give us a call and we’ll walk you through it.
Still Not Printing?
If you’ve gone through the list and the tickets still aren’t coming out, call your POS dealer or support line. There could be a connection or routing issue. If you’re an HCS customer, call us any time, day or night. You’ll get a real person, never a call center, and we can often walk you through the fix over the phone. If the printer needs to be swapped or looked at in person, we can take care of that too.
Not an HCS Customer Yet?
We offer a free demo, comparison, or quote. Call 330-633-1221 or request a quote on our website.